document number: 93105 for technical questions, contact: diodestech@vishay.com www.vishay.com revision: 01-oct-09 1 high performance schottky generation 5.0, 2 x 15 a 30CTT050-F vishay high power products features ? 175 c high performance schottky diode ? very low forward voltage drop ? extremely low reverse leakage ? optimized v f vs. i r trade off for high efficiency ? increased ruggedness for reverse avalanche capability ? rbsoa available ? negligible switching losses ? submicron trench technology ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level applications ? high efficiency smps ? automotive ? high frequency switching ? output rectification ? reverse battery protection ? freewheeling ? dc/dc systems ? increased power density systems product summary i f(av) 2 x 15 a v r 50 v v f at 15 a at 125 c 0.54 a to-220ab anode 13 2 base common cathode 2 common cathode anode major ratings and characteristics symbol characteristics values units v rrm 50 v v f 15 apk, t j = 125 c (typical, per leg) 0.50 t j range - 55 to 175 c voltage ratings parameter symbol test conditions 30ctt050 units maximum dc reverse voltage v r t j = 25 c 50 v absolute maximum ratings parameter symbol test conditions values units maximum average forward current per leg i f(av) 50 % duty cycle at t c = 146 c, rectangular waveform 15 a per device 30 maximum peak one cycle non-repetitive surge current per leg i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 880 10 ms sine or 6 ms rect. pulse 220 non-repetitive aval anche energy per leg e as t j = 25 c, i as = 5 a, l = 4.4 mh 55 mj repetitive avalanche current per leg i ar limited by frequency of operati on and time pulse duration so that t j < t j max. i as at t j max. as a function of time pulse see fig. 8 i as at t j max. a
www.vishay.com for technical questions, contact: diodestech@vishay.com document number: 93105 2 revision: 01-oct-09 30CTT050-F vishay high power products high performance schottky generati on 5.0, 2 x 15 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions typ. max. units forward voltage drop per leg v fm (1) 15 a t j = 25 c -0.60 v 30 a - 0.72 15 a t j = 125 c -0.54 30 a - 0.69 reverse leakage current per leg i rm (1) t j = 25 c v r = rated v r - 105 a t j = 125 c - 8.5 ma junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 1020 - pf series inductance per leg l s measured lead to lead 5 mm from package body 8.0 - nh maximum voltage rate of change dv/dt rated v r - 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation 2.5 c/w maximum thermal resistance, junction to case per device 1.25 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.5 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style to-220ab 30ctt050
document number: 93105 for technical questions, contact: diodestech@vishay.com www.vishay.com revision: 01-oct-09 3 30CTT050-F high performance schottky generation 5.0, 2 x 15 a vishay high power products fig. 1 - maximum forward voltage drop characteristic s fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics i f - instantaneous forward current (a) v fm - forward volta g e drop (v) 0.2 0.4 0.6 0. 8 1.0 1.2 1 10 100 93105_01 t j = 175 c t j = 125 c t j = 25 c i r - reverse current (ma) v r - reverse volta g e (v) 010 3040 20 50 0.0001 0.001 0.01 0.1 1 10 100 93105_02 t j = 125 c t j = 175 c t j = 150 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c c t - junction capacitance (pf) v r - reverse volta g e (v) 01020 40 30 50 100 10 000 1000 93105_03 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectan g ular pulse duration (s) z thjc - thermal impedance (c/w) . single p u lse (thermal resistance) 93105_04 d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20
www.vishay.com for technical questions, contact: diodestech@vishay.com document number: 93105 4 revision: 01-oct-09 30CTT050-F vishay high power products high performance schottky generati on 5.0, 2 x 15 a fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - maximum non-repetitive surge current note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r allowable case temperature (c) i f(av) - avera g e forward current (a) 10 51520 25 0 140 160 1 8 0 100 120 93105_05 s qu are w a v e (d = 0.50) 8 0 % rated v r applied see note (1) dc avera g e power loss (w) i f(av) - avera g e forward current (a) 20 15 10 5 25 0 12 15 0 6 9 3 1 8 0 120 90 60 30 dc 93105_06 rms limit 100 10 100 t p - square wave pulse duration (s) i fsm - non-repetitive sur g e current (a) 93105_07 1000 10 000 1000
document number: 93105 for technical questions, contact: diodestech@vishay.com www.vishay.com revision: 01-oct-09 5 30CTT050-F high performance schottky generation 5.0, 2 x 15 a vishay high power products fig. 8 - reverse bias safe operating area (a valanche current vs. rectangular pulse duration) fig. 9 - reverse bias safe operating area (a valanche energy vs. rectangular pulse duration) 1 10 1000 100 110 rectan g ular pulse duration (s) avalanche current (a) 100 t j = 25 c t j = 125 c t j = 175 c 93105_0 8 1 10 100 110 rectan g ular pulse duration (s) avalanche ener g y (mj) 100 t j = 25 c t j = 125 c t j = 175 c 93105_09
www.vishay.com for technical questions, contact: diodestech@vishay.com document number: 93105 6 revision: 01-oct-09 30CTT050-F vishay high power products high performance schottky generati on 5.0, 2 x 15 a ordering information table 1 - current rating (30 a) 2 - circuit configuration: c = common cathode 3 - package: t = to-220 4 - t = trench 5 - voltage code (50 v) 6 - f = rohs compliant and totally lead (pb)-free tube standard pack quantity: 50 pieces device code 5 13 24 6 30 c t t 050 - f links to related documents dimensions www.vishay.com/doc?95222 part marking information www.vishay.com/doc?95028
document number: 95222 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 08-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 to-220ab outline dimensions vishay semiconductors dimensions in millimeters and inches notes (1) dimensioning and tolerancin g as per asme y14.5m-1994 (2) lead dimension and fini sh uncontrolled in l1 (3) dimension d, d1 and e do not in clude mold flash. mold flash shall not exceed 0.127 mm (0.005" ) per side. these dimensions are measured at the outermost extremes of th e plastic body (4) dimension b1, b3 and c1 apply to base metal only (5) controlling dimensions: inches (6) thermal pad contour optional within dimensions e, h1, d2 and e1 (7) dimensions e2 x h1 define a zone where stamping and singulation irregularities are allowed (8) outline conforms to jedec to- 220, except a2 (maximum) and d2 (minimum) where dimensions are derived from the actual package outline symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.25 4.65 0.167 0.183 e 10.11 10.51 0.398 0.414 3, 6 a1 1.14 1.40 0.045 0.055 e1 6.86 8.89 0.270 0.350 6 a2 2.56 2.92 0.101 0.115 e2 - 0.76 - 0.030 7 b 0.69 1.01 0.027 0.040 e 2.41 2.67 0.095 0.105 b1 0.38 0.97 0.015 0.038 4 e1 4.88 5.28 0.192 0.208 b2 1.20 1.73 0.047 0.068 h1 6.09 6.48 0.240 0.255 6, 7 b3 1.14 1.73 0.045 0.068 4 l 13.52 14.02 0.532 0.552 c 0.36 0.61 0.014 0.024 l1 3.32 3.82 0.131 0.150 2 c1 0.36 0.56 0.014 0.022 4 ? p 3.54 3.73 0.139 0.147 d 14.85 15.25 0.585 0.600 3 q 2.60 3.00 0.102 0.118 d1 8.38 9.02 0.330 0.355 ? 90 to 93 90 to 93 d2 11.68 12.88 0.460 0.507 6 13 2 d d1 h1 q 13 2 c c d d 3 x b2 3 x b (b, b2) b1, b3 (h1) d2 detail b c a b l e1 lead tip e e2 ? p 0.014 a b m m 0.015 a b mm s eating plane c a2 a1 a a a lead assignments diode s 1. - anode/open 2. - cathode 3. - anode conforms to jedec outline to-220ab (6) (6) (7) (6) (7) e 2 x l1 (2) detail b s ection c - c and d - d view a - a ba s e metal plating (4) (4) c1 c (6) thermal pad (e) e1 (6)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
